Mainboard Supermicro H11DSi-NT SPECIFICATIONS
| Product Type/Brand | Mainboard Supermicro |
| Product SKUs | H11DSi-NT |
| Form Factor | 12″ x 13.05″ (30.5cm x 33.1cm) |
| PROCESSOR | |
| CPU | Dual AMD EPYC™ 7001/7002* series Processors (*Board revision 2.x required) Socket SP3 Up to 240W TDP |
| Cores/Cache | Up to 32 Cores Up to 64 Cores (Board revision 2.x required) |
| SYSTEM MEMORY | |
| Memory Capacity | 16 DIMM sockets Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM Supports up to 4TB Registered ECC DDR4 3200MHz SDRAM (Board revision 2.x required) 8-channel memory bus |
| Memory Type | DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs DDR4 3200 MHz Registered ECC, 288-pin gold-plated DIMMs (Board revision 2.x required) |
| DIMM Sizes | 8GB, 16GB, 32GB, 64GB, 128GB, 256GB* (*Board revision 2.x required) |
| Memory Voltage | 1.2V |
| On-board Devices | |
| SATA | SATA3 (6 Gbps) |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2500 BMC |
| Network Controller | Intel® X550 10G Base-T Ethernet Controller 1 Realtek RTL8211E PHY (dedicated IPMI) |
| VGA | ASPEED AST2500 BMC |
| INPUT/OUTPUT | |
| SATA | 10 SATA3 (6 Gbps) ports |
| NVMe | 2 Internal NVMe Ports (PCI-E 3.0 x4) |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 2 USB 3.0 ports (rear) 4 USB 2.0 ports (2 rear + 2 via header) |
| VGA | 1 VGA port |
| EXPANSION SLOTS | |
| PCI-Express | 3 PCI-E 3.0 x8 2 PCI-E 3.0 x16 |
| M.2 | Interface: 1 SATA/PCI-E 3.0 x2 (Platform with EPYC 7002 processor only supports PCI-E type M.2 module) Form factor: 2280, 22110 Key: M-key |
Mainboard Supermicro H11DSi-NT SPECIFICATIONS – CLICK HERE
Đánh giá