Thông số kỹ thuật Palo Alto Networks Firewall PA-1420
| Firewall throughput (HTTP/appmix) | 9.9/9.5 Gbps |
| Threat Prevention throughput (HTTP/appmix) | 5.2/5.0 Gbps |
| IPsec VPN throughput | 6.9 Gbps |
| Max sessions | 1,400,000 |
| New sessions per second | 140,000 |
| Virtual systems (base/max) | 1/6 |
| Interface Modes |
| L2, L3, tap, virtual wire (transparent mode) |
| Routing |
| OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing |
| Policy-based forwarding |
| Point-to-Point Protocol over Ethernet (PPPoE) |
| Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 |
| SD-WAN |
| Path quality measurement (jitter, packet loss, latency) |
| Initial path selection (PBF) |
| Dynamic path change |
| IPv6 |
| L2, L3, tap, virtual wire (transparent mode) |
| Features: App-ID, User-ID, Content-ID, WildFire, and SSL Decryption |
| SLAAC |
| IPsec VPN |
| Key exchange: manual key, IKEv1 and IKEv2 (pre-shared key, certificate-based authentication) |
| Encryption: 3DES, AES (128-bit, 192-bit, 256-bit) |
| Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 |
| VLANs |
| 802.1Q VLAN tags per device/per interface: 4,094/4,094 |
| Aggregate interfaces (802.3ad), LACP |
| Network Address Translation |
| NAT modes (IPv4): static IP, dynamic IP, dynamic IP and port (port address translation) |
| NAT64, NPTv6 |
| Additional NAT features: dynamic IP reservation, tunable dynamic IP and port oversubscription |
| High Availability |
| Modes: active/active, active/passive, HA clustering |
| Failure detection: path monitoring, interface monitoring |
| Networking I/O | 10/100/1000 (8), 1/2.5/5 Gb (4)/PoE, gigabit SFP (2), 10 Gigabit SFP+ (8) |
| Management I/O | 10/100/1000 out-of-band management port (1) HSCI 10 gigabit high availability (1) RJ-45 console port (1) USB port (1) Micro USB console port (1) |
| Power over Ethernet (PoE) | Total PoE Power Budget: 151W, Maximum load on single port: 90W |
Thông số kỹ thuật chi tiết xem: tại đây
Đánh giá