Thông số kỹ thuật Palo Alto Networks PA-5450
| Firewall throughput (HTTP/appmix) | 200/200 Gbps |
| Threat Prevention throughput (HTTP/appmix) | 125/150 Gbps |
| IPsec VPN throughput | 95 Gbps** |
| Max sessions | 100M |
| New sessions per second | 4M |
| Virtual systems (base/max) | 25/225 |
| Interface Modes |
| L2, L3, tap, virtual wire (transparent mode) |
| Routing |
| OSPFv2/v3 with graceful restart, BGP with graceful restart, RIP, static routing |
| Policy-based forwarding |
| Point-to-point protocol over Ethernet (PPPoE) and DHCP supported for dynamic address assignment |
| Multicast: PIM-SM, PIM-SSM, IGMP v1, v2, and v3 |
| Bidirectional Forwarding Detection (BFD) |
| SD-WAN |
| Path quality measurement (jitter, packet loss, latency) |
| Initial path selection (PBF) |
| Dynamic path change |
| IPv6 |
| L2, L3, tap, virtual wire (transparent mode) |
| Features: App-ID, User-ID, Content-ID, WildFire, and SSL Decryption |
| SLAAC |
| IPsec VPN |
| Key exchange: manual key, IKEv1 and IKEv2 (pre-shared key, certificate-based authentication) |
| Encryption: 3DES, AES (128-bit, 192-bit, 256-bit) |
| Authentication: MD5, SHA-1, SHA-256, SHA-384, SHA-512 |
| GlobalProtect large-scale VPN for simplified configuration and management |
| I/O | 100/1000/10G Cu (4), 1G/10G SFP/ SFP+ (12), 40G/100G QSFP28 (2); minimum 1 NC and maximum 2 NCs per system; 2 NCs require 2 or more DPCs installed |
| Max Inrush Current |
| AC: 35 A @ 230 VAC, 35 A @ 120 VAC |
| DC: 50 A @ 72 VDC |
| Rack Mount (Dimensions) |
| 5U, 19” standard rack 8.75” H x 30.25” D x 17.38” W |
| Maximum Time Between Failure (MTBF) |
| Configuration dependent; contact your Palo Alto Networks representative for MTBF details. |
| Safety |
| cTUVus, CB |
| EMI |
| FCC Class A, CE Class A, VCCI Class A, KCC Class A, BSMI Class A |
| Environment |
| Operating temperature: 32° to 122° F, 0° to 50° C |
| Non-operating temperature: -4° to 158° F, -20° to 70° C |
Thông số kỹ thuật chi tiết xem: tại đây
Đánh giá