Thông số kỹ thuật Switch H3C S12508CR
| Item | S12508CR |
| Switching capacity | 967T/2903T |
| Throughput | 460,800Mpps |
| MPU slots | 2 |
| LPU slots | 8 |
| Switching fabric module slots | 9 |
| Weight (full configuration) | ≤400kg |
| Dimensions (H x W x D) mm | 842 x442 x920（19U） |
| Redundancy | Redundant MPUs, switching fabric modules, power modules, and fan trays |
Software Specifications
| Ethernet | IEEE 802.1Q |
| DLDP | |
| LLDP | |
| Static MAC configuration | |
| Limited MAC learning | |
| Port mirroring and flow mirroring | |
| Port aggregation and port isolation | |
| IEEE 802.1D (STP)/802.1w (RSTP)/802.1s (MSTP) | |
| IEEE 802.3ad (dynamic link aggregation), static port aggregation, and multi-chassis link aggregation | |
| WAN | SR |
| SR-TE/SR-TE Traffic Statistics | |
| SR-TE tunnel BFD detection | |
| SRv6 | |
| 1588v2 | |
| SyncE | |
| IPv4 | Static routing, RIP, OSPF, IS-IS, and BGP4 |
| VRRP and VRRP load balance | |
| ECMP | |
| Policy-based routing | |
| Routing policy | |
| GRE Tunnel | |
| IPv4 in IPv4 Tunnel | |
| IPv6 | IPv4/IPv6 dual stack |
| IPv6 static routing, RIPng, OSPFv3, IS-ISv6, and BGP4+ | |
| VRRPv3 and VRRPv3 load balancing | |
| Pingv6, Telnetv6, FTPv6, TFTPv6, DNSv6, and ICMPv6 | |
| 6PE | |
| IPv4-to-IPv6 transition technologies, such as IPv6 manual tunnel, 6to4 tunnel, ISATAP tunnel, GRE tunnel, and auto IPv4-compatible IPv6 tunnel | |
| ECMP | |
| Policy-based routing | |
| Routing Policy | |
| Multicast | IGMP V1/V2/V3 and IGMP V1/V2/V3 snooping |
| IGMP Snooping Fast-leave、IGMP Snooping Group-policy | |
| PIM-DM, PIM-SM, PIM-SSM, MSDP, MBGP, and Any-RP | |
| PIM6-DM, PIM6-SM, and PIM6-SSM | |
| MLD V1 snooping | |
| MSDP | |
| MPLS | Support P/PE |
| Support hierarchical PE | |
| Supports cross-domain MPLS VPN modes (Option1/Option2/Option3) | |
| Support multi-role hosts | |
| Support VLL, realize point-to-point L2 MPLS VPN | |
| Support VPLS/H-VPLS to realize point-to-multipoint Layer 2 MPLS VPN function | |
| Support distributed multicast VPN | |
| ACLs | Standard and extended ACLs |
| Ingress and egress ACLs | |
| VLAN ACLs | |
| Global ACLs | |
| support up to 2M ACL on each board | |
| QoS | Diff-Serv QoS |
| Traffic policing | |
| Traffic shaping | |
| Congestion avoidance | |
| Priority marking and remarking | |
| 802.1p, TOS, DSCP, and EXP priority mapping | |
| VOQ | |
| SP/WRR/SP+WRR | |
| SDN/OPENFLOW | Cloud MPU supports running SDN controller |
| Support multi-table line | |
| Support OPENFLOW | |
| Support multi-controller (EQUAL mode, standby mode) | |
| Support Group table | |
| Support Meter | |
| Support Netconf | |
| Support OVSDB | |
| VXLAN | VXLAN gateway |
| IS-IS+ENDP distributed control plane | |
| OpenFlow+Netconf centralized control plane | |
| MP-BGP+EVPN distributed control plane | |
| IPv6 VXLAN over IPv4 | |
| HA | Independent switching fabric modules |
| 1+1 redundancy for MPUs and power supply modules | |
| N+M redundancy for switching fabric modules | |
| Passive backplane | |
| Heat dissipation hole design on the board panel | |
| Hot pluggable for all components | |
| Real-time data backup on active/standby MPUs | |
| Hot patching | |
| NSR/GR for OSFP/BGP/IS-IS/RSVP | |
| BFD for VRRP/BGP/IS-IS/OSPF/RSVP/static routing | |
| Support IP FRR、TE FRR, service switching time is less than 50ms | |
| Security | Support user hierarchical management and password protection |
| Support SSHv2 | |
| Support FTP login and password mechanism based on restricted IP address | |
| Support standard and extended ACL, ACL flow filtering mechanism | |
| Support to prevent ARP, unknown multicast packets, broadcast packets, unknown unicast packets, local network segment route scan packets, TTL=1/0 packets, protocol packets and other attack functions | |
| Support uRPF | |
| Support IEEE 802.1x, Radius/AAA | |
| Supports plain and MD5 authentication of OSPF, RIPv2 and BGPv4 messages | |
| Support SNMPv3, SSHv2 | |
| Support unknown unicast, unknown multicast, broadcast packet suppression | |
| Support data backup mechanism | |
| System management | Support Console/AUX Modem/Telnet/SSH2.0 |
| Support FTP, TFTP, Xmodem，SFTP | |
| Support SNMP v1/v2/v3 | |
| Support RMON, support 1, 2, 3, 9 groups | |
| Support NTP clock | |
| Support NQA | |
| Support alarm and self-recovery | |
| Support system work log | |
| O&M
| Support Telemetry |
| Support INT | |
| Support micro-burst statistics | |
| Support VXLAN OAM, including VXLAN ping, VXLAN tracert | |
| Support Puppet, Ansible | |
| Temperature | Operating temperature: 0°C to 40°C (32°F to 104°F) |
| Storage temperature: -40°C to 70°C (-40°F to 158°F) | |
| Humidity | Operating Humidity: 5% to 95% (non-condensing) |
| Storage Humidity: 5% to 95% (non-condensing) | |
| Green | WEEE,RoHS |
| Safety | CE, UL/cUL, FCC-PART15, VCCI,etc. |
Chi tiết specs xem tại đây
Đánh giá