Thông số kỹ thuật Switch H3C S6520X-30QC-EI
Item | S6520X-30QC-EI |
CPU | Dual Core, 1.6GHz |
Box switching capacity | 2.56Tbps |
Port switching capacity | 960Gbps |
Packet forwarding rate | 705Mpps |
Dimensions (H × W × D) | 43.6 × 440 × 360 mm (1.72 × 17.32 × 14.17 in) |
Weight | ≤7KG |
Flash/SDRAM | 1GB/2GB |
Console ports | 1 |
Management Ethernet ports | 1 |
USB ports | 1 |
SFP+ | 24 |
QSFP | 2 |
QSFP28 | – |
Expansion slots | 2 |
Stacking bandwidth | Maximum 480Gbps |
Maximum stacking num | 9 |
Expansion modules | 2-Port 10G SFP Plus Ethernet Optical Interface Module 4-Port 10G SFP Plus Ethernet Optical Interface Module 8-Port 10G SFP+ with MACSec Interface Module 8-Port 1/2.5/5G BASE-T Ethernet Copper Interface Module 8-Port 1/2.5/5/10G BASE-T Ethernet Copper Interface Module 2-port 25GE SFP28 interface module 2-port 40GE QSFP+ interface module 8-port 25GE SFP28 interface module (for S6520X-54HC-EI) 2-port 100GE QSFP28 interface module (for S6520X-54HC-EI) |
Input voltage range | Rated: 100 VAC to 240 VAC @ 50 Hz/60 Hz Max.: 90 VAC to 264 VAC @ 47 Hz to 63 Hz Rated voltage range: –48 to–60VDC Max voltage range: –36 to–72VDC |
Fan trays | 2 hot swappable fan trays, adjustable speed, and invertible airflow |
PS slots | 2 |
Idle power consumption | Single AC: 38W |
Max. power consumption | Single AC: 179W |
Operating temperature | 0ºC to 45ºC (32°F to 113°F) -60m-5000m altitude: From 0m, the maximum operating temperature reduce by 0.33℃ for every time 100 the altitude increases by 100m. |
Storage temperature | -40℃ to 70℃(-40℉ to 158℉) |
Operating & storage humidity | 5% RH to 95% RH, non-condensing |
MTBF(Year) | 62.8 |
MTTR(Hour) | 1 |
Packet Buffer | 10M |
Virtualization | Intelligent Resilient Framework 2 (IRF2) Distributed device management Distributed link aggregation Distributed resilient routing Stacking through standard Ethernet ports Local device stacking and remote device stacking LACP-, BFD-, and ARP-based multi-active detection (MAD) |
Link aggregation | 10GE/40GE/100GE port aggregation Static aggregation Dynamic aggregation |
Jumbo frame | Supported |
MAC address table | Max. 128K MAC address entries Static MAC address Blackhole MAC address MAC learning limit |
OpenFlow | OpenFlow 1.3 |
VxLAN | VXLAN L2 switching VXLAN L3 routing VXLAN VTEP IS-IS+ENDP distributed control plane MP-BGP+EVPN distributed control plane OpenFlow+Netconf centralized control plane |
VLAN | Port-based VLAN (up to 4094 VLANs) Default VLAN QinQ and flexible QinQ VLAN mapping PVST+ and RPVST+ |
Traffic monitoring | sFLOW |
LLDP | LLDP/LLDP-MED |
DHCP | DHCP client DHCP snooping DHCP relay DHCP server DHCP snooping Option 82/DHCP relay Option 82 |
ARP | Max. 64K ARP Static entry Gratuitous ARP Common proxy ARP and local proxy ARP Dynamic ARP inspection ARP anti-attack ARP source suppression ARP detection based on DHCP snooping safety entries, 802.1X entries, and IP/MAC static binding entries |
Routing | 64K IPV4 routing entries 32K IPV6 routing entries IPv4/IPv6 static routing Dynamic routing such as RIP v1/2 and RIPng Policy routing Equal-cost multi-path routing (ECMP) VRRP OSPFv1/v2/v3 BGP IS-IS |
IPv6 | Neighbor Discovery (ND) PMTU ICMP v6, Telnet v6, SFTP v6, SNMP v6, BFD v6, VRRP v3 IPv6 Portal IPv6 tunnel |
Multicast | IGMP Snooping v2/v3 IGMP Snooping fast-leave IGMP Snooping group-policy PIM-SM and PIM-SSM PIM snooping MVRP (GVRP analog) MFF Enhanced Layer 3 multicast |
MPLS | Support MPLS Support MCE Support MPLS VPN, VPLS |
Zero configuration | DHCP auto-config CWMP-TR069 |
Broadcast/Multicast/Unicast storm suppression | Storm suppression based on port bandwidth percentage Storm suppression based on PPS Storm suppression based on BPS |
Loop-free redundant Layer 2 topology | STP/RSTP/MSTP STP Root Guard BPDU Guard BPDU Blocking and Root Guard Link Detection (UDLD) Digital Diagnostic Monitor (DDM) G.8032 Ethernet ring protection switching (ERPS) |
QoS/ACL | Rate limit for receiving and transmitting packets CAR Eight output queues per port Flexible queue scheduling algorithms based on both port and queue, including SP, WDRR, WRR, WFQ, and SP+WRR 802.1p priority and DSCP priority Layer 2 to Layer 4 packet filtering Traffic classification based on source MAC, destination MAC, source IP, destination IP, port, protocol, and VLAN Time range WRED |
Mirroring | Flow mirroring N:4 port mirroring Local port mirroring and remote port mirroring Policy-based Mirroring Traffic Mirroring |
Security | Hierarchical user management and password protection MAC-based authentication 802.1X Storm constrain AAA authentication RADIUS authentication HWTACACS SSH2.0 Port isolation IP/Port/MAC binding IP source guard HTTPs SSL Public Key Infrastructure (PKI) CPU protection Control Plane Protection (CoPP), Wireless Intrusion Prevention System (WIPS) |
IEEE | IEEE 802.3x IEEE 802.3ad IEEE 802.3bz IEEE 802.1p IEEE 802.1x IEEE 802.1q IEEE 802.1d IEEE 802.1w IEEE 802.1s |
Loading and upgrading | Loading and upgrading through XMODEM/FTP/TFTP Loading and upgrading from USB |
Management and maintenance | Configuration from CLI Login through Telnet, and the console port Job scheduler ISSU VCT 802.1ag and 802.3ah Simple Network Management Protocol (SNMP) IMC network management system System log Alarming based on severity NTP Power, fan, and temperature alarming Debugging information output Ping and Tracert Track Telnet-based remote maintenance |
EMC | FCC Part 15 Subpart B CLASS A ICES-003 CLASS A VCCI CLASS A CISPR 32 CLASS A EN 55032 CLASS A AS/NZS CISPR32 CLASS A CISPR 24 EN 55024 EN 61000-3-2 EN 61000-3-3 GB/T 9254 YD/T 993 |
Safety | UL 60950-1 CAN/CSA C22.2 No 60950-1 IEC 60950-1 EN 60950-1 AS/NZS 60950-1 FDA 21 CFR Subchapter J GB 4943.1 |
Chi tiết specs xem tại đây
Đánh giá