Thông số kỹ thuật Switch H3C S9850-32H
Item | S9850-32H |
Dimensions (H × W × D) | 43.6 × 440 × 460 mm (1.72 × 17.32 × 18.11 in) |
Weight(Full loaded) | ≤ 15 kg (33.07 lb) |
Serial console port | 1 |
Out-of-band management port | One GE copper port and one GE fiber port |
Mini USB console port | 1 |
USB port | 1 |
QSFP28 | 32 |
SFP port | 2 |
Expansion slot | – |
CPU | 2.4GHz @4Cores |
Flash/SDRAM | 4GB/8GB |
Latency | < 1.5μs |
Switching capacity | 6.4 Tbps |
Forwarding capacity | 2024 Mpps |
Buffer | 32M |
AC-input voltage | 90v to 264v |
DC-input voltage | –40v to –72v |
Power module slot | 2 |
Fan tray slot | 5 |
Air flow direction | From front to rear or from rear to front |
Static power consumption | Single AC: 154 W Dual AC: 166 W Single DC: 154 W Dual DC: 163 W |
Typical power consumption | Single AC: 198 W Dual AC: 210 W Single DC: 197 W Dual DC: 208 W |
Maximum heat consumption (BTU/hour) | Single AC: 676 Dual AC: 717 Single DC: 672 Dual DC: 710 |
MTBF(day) | 27.2 |
MTTR(hour) | 1 |
Operating temperature |
Software Specification
Device Virtualization | IRF |
M-LAG(DRNI) | |
S-MLAG | |
Network Virtualization | BGP-EVPN |
VxLAN | |
EVPN ES | |
VxLAN | L2 VxLAN gateway |
L3 VxLAN gateway | |
Distributed VxLAN gateway | |
Centralized VxLAN gateway | |
EVPN VxLAN | |
manual configured VxLAN | |
IPv4 VxLAN tunnel | |
IPv6 VxLAN tunnel | |
QinQ VxLAN access | |
SDN | H3C SeerEngine-DC |
Lossless network | PFC and ECN |
DCBX | |
RDMA and ROCE | |
PFC deadlock watchdog | |
ECN overlay | |
ROCE stream analysis | |
Programmability | Openflow1.3 |
Netconf | |
Ansible | |
Python//TCL/Restful API to realize DevOps automated operation and maintenance | |
Openflow1.3 | |
Traffic analysis | Sflow |
Netstream | |
VLAN | Port-based VLANs |
Mac-based VLAN ,Subnet-based VLAN and Protocol VLAN | |
VLAN mapping | |
QinQ | |
MVRP(Multiple VLAN Registration Protocol) | |
Super VLAN | |
PVLAN | |
MAC address | Dynamic learning and aging of mac address entries |
Dynamic,static and blackhole entries | |
Mac address limiting on ports | |
IPv4 routing | RIP(Routing Information Protocol) v1/2 |
OSPF (Open Shortest Path First) v1/v2 | |
ISIS(Intermediate System to Intermediate system) | |
BGP (Border Gateway Protocol) | |
Routing policy | |
VRRP | |
PBR | |
IPv6 routing | RIPng |
OSPFv3 | |
IPv6 ISIS | |
BGP4+ | |
Routing policy | |
VRRP | |
PBR | |
MPLS/VPLS | Support L3 MPLS VPN |
Support L2 VPN: VLL (Martini, Kompella) | |
Support VPLS, VLL | |
Support hierarchical VPLS and QinQ+VPLS access | |
Support P/PE function | |
Support LDP protocol | |
Support MCE | |
Support MPLS OAM | |
Multicast | IGMP snooping |
MLD snooping | |
IPv4 and IPv6 multicast VLAN | |
IPv4 and IPv6 PIM snooping | |
IGMP and MLD | |
PIM and IPv6 PIM | |
MSDP | |
Multicast VPN | |
Reliability | LACP |
STP/RSTP/MSTP protocol, PVST compatible | |
STP Root Guard and BPDU Guard | |
RRPP and ERPS | |
Ethernet OAM | |
Smartlink | |
DLDP | |
BFD for OSPF/OSPFv3, BGP/BGP4, IS-IS/IS-ISv6, PIM/IPM for IPv6 and Static route | |
VRRP and VRRPE | |
LACP | |
STP/RSTP/MSTP protocol, PVST compatible | |
STP Root Guard and BPDU Guard | |
FC/FOCE | FC, FC subcard is supported on S9850-4C |
FCOE | |
QOS | Weighted Random Early Detection (WRED) and tail drop |
Flexible queue scheduling algorithms based on port and queue, including strict priority (SP), Weighted Deficit Round Robin (WDRR), Weighted Fair Queuing (WFQ), SP + WDRR, and SP + WFQ. | |
Traffic shaping | |
Packet filtering at L2 (Layer 2) through L4 (Layer 4); flow classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, port, protocol, and VLAN to apply qos policy,including mirroring,redirection,priority remark etc. | |
Committed access rate (CAR) | |
Account by packet and byte | |
COPP | |
Telemetry | gRPC |
ERSPAN | |
Mirror on drop | |
Telemetry Stream | |
INT | |
iNQA | |
Packet trace, Packet capture | |
Configuration and maintenance | Console telnet and SSH terminals |
SNMPv1/v2/v3 | |
ZTP | |
System log | |
File upload and download via FTP/TFTP BootRom update and remote update | |
NQA | |
ping,tracert | |
VxLAN ping and VxLAN tracert | |
NTP | |
PTP(1588v2) | |
GIR Graceful Insertion and Removal | |
Security and management | Macsec, Macsec subcard is supported on S9850-4C and only 100G macsec subcard can support 256-bit AES encryption |
Micro-Segmentation | |
Hierarchical management and password protection of users | |
Authentication methods,including AAA,RADIUS and HWTACACS | |
Support DDos, ARP attack and ICMP attack function | |
IP-MAC-port binding and IP Source Guard | |
SSH 2.0 | |
HTTPS | |
SSL | |
PKI | |
Boot ROM access control (password recovery) | |
RMON | |
EMC | FCC Part 15 Subpart B CLASS A ICES-003 CLASS A VCCI CLASS A CISPR 32 CLASS A EN 55032 CLASS A AS/NZS CISPR32 CLASS A CISPR 24 EN 55024 EN 61000-3-2 EN 61000-3-3 ETSI EN 300 386 GB/T 9254 YD/T 993 |
IEEE Standard | 802.3x/802.3ad/802.3AH/802.1P/802.1Q/802.1X/802.1D/802.1w/802.1s/802.1AG 802.1x/802.1Qbb/802.1az/802.1Qaz |
Safety | UL 60950-1 CAN/CSA C22.2 No 60950-1 IEC 60950-1, EN 60950-1 AS/NZS 60950-1 FDA 21 CFR Subchapter J GB 4943.1 |
Chi tiết specs xem tại đây
Đánh giá