Thông Số Kỹ Thuật Switch Cisco Catalyst C9200-48T
Description | Specifications |
| Performance | |
Switching capacity | 176 Gbps |
Forwarding rate | 130.95 Mpps |
Virtual Networks | 4 |
Stacking bandwidth | 160 Gbps |
Total number of MAC addresses | 32,000 |
Total number of IPv4 routes (ARP plus learned routes) | 14,000 (10,000 direct routes and 4,000 indirect routes) |
IPv4 routing entries | 4,000 |
IPv6 routing entries | 2,000 |
Multicast routing scale | 1,000 |
QoS scale entries | 1,000 |
ACL scale entries | 1,600 |
Packet buffer per SKU | 6 MB buffers |
Flexible NetFlow (FNF) entries | 16,000 flows |
DRAM | 4 GB |
Flash | 4 GB |
VLAN IDs | 4096 |
Total Switched Virtual Interfaces (SVIs) | 1000 |
Jumbo frames | 9198 bytes |
Default primary power supply | PWR-C6-125WAC |
Optional secondary power supply | PWR-C6-125WAC |
Features | |
| Switch fundamentals | Layer 2, Routed Access (RIP, EIGRP Stub, OSPF – 1000 routes), PBR, PIM Stub Multicast (1000 routes), PVLAN, VRRP, PBR, CDP, QoS, FHS, 802.1X, MACsec-128, CoPP, SXP, IP SLA Responder |
| Automation | NETCONF, RESTCONF, YANG, PnP Agent, PnP |
| Telemetry and visibility | Model-driven telemetry, sampled NetFlow, SPAN, RSPAN |
| Security | MACsec-128 |
| Physical Specifications | |
| Chassis Dimensions | 1.73 x 17.5 x 13.8 Inches 4.4 x 44.5 x 35.0 Centimeters |
| weight | 11.02 Pounds 5.0 Kilograms |
| Mean time between failures (hours) | 375,570 |
| Connectors | |
| Connectors and cabling | – 1000BASE-T ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling – 1000BASE-T SFP-based ports: RJ-45 connectors, 4-pair Cat 5E UTP cabling – 100BASE-FX, 1000BASE-SX, -LX/LH, -ZX, -BX10, dense wavelength-division multiplexing (DWDM) and Coarse Wavelength-Division Multiplexing (CWDM) SFP transceivers: LC fiber connectors (single-mode or multimode fiber) – 10GBASE-SR, LR, LRM (only C9200), ER, ZR, DWDM SFP+ transceivers: LC fiber connectors (single-mode or multimode fiber) – SFP+ connector – Cisco StackWise-160 stacking ports: copper-based Cisco StackWise cabling – Ethernet management port: RJ-45 connectors, 4-pair Cat 5 UTP cabling – Management console port: RJ-45-to-DB9 cable for PC connections,USB-C adaptor, USB adaptor |
| Power connectors | Internal power supply connector: The internal power supply is an auto-ranging unit. It supports input voltages between 100 and 240 VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet. |
| Standards, Safety and compliance information | |
| Standards | IEEE 802.1s IEEE 802.1w IEEE 802.1x IEEE 802.1x-Rev IEEE 802.3ad IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports IEEE 802.1D Spanning Tree Protocol IEEE 802.1p CoS prioritization IEEE 802.1Q VLAN IEEE 802.3 10BASE-T specification IEEE 802.3u 100BASE-TX specification IEEE 802.3ab 1000BASE-T specification IEEE 802.3z 1000BASE-X specification IEEE 802.3bz 10G BASE-T specification RMON I and II standards SNMPv1, v2c, and v3 |
| Safety certifications | – IEC 60950-1 – UL 60950-1 – CAN/CSA C22.2 No. 60950-1 – EN 60950-1 – AS/NZS 60950.1 – Class I Equipment |
| Electromagnetic emissions certifications | – 47 CFR Part 15 – CISPR 22 Class A – CISPR 32 Class A – CNS 13438 – EN 300 386 – EN 55022 Class A – EN 55032 Class A – EN61000-3-2 – EN61000-3-3 – ICES-003 Class A – KN 32 – TCVN 7189 Class A – V-3 Class A – CISPR 24 – EN 300 386 – EN 55024 – KN 35 – TCVN 7317 |
| Environmental | Reduction of Hazardous Substances (ROHS) 5 |
Thông số kỹ thuật chi tiết xem tại đây
Đánh giá